Guangdong Yaolong Metal Technology Co., Ltd.
What's question do you have about your project? Leave us a note:
We're not around right now,but leave us your information and we'll get in touch as soon as we can .Thanks! contact us
The electric flagpole is a metal flagpole that lift and lower the flag by means of remote controlled. The control system uses a stepping motor to drive and work together with controller to raise and lower the flag. The stainless steel automatic flagpole has the same appearance as the stainless steel tapered flag pole,which is equipped with an internal electric motor controlled winch device based on the stainless steel tapered flagpole.
As a modified version of the manual flagpole, the stainless steel automatic raise tapered flag pole saves labor and maintenance costs,especially for the
Features of stainless steel electric flagpole:
1.can raise and lower the flagpole by remote control lifting,the winch contains an automatic brake system to permit locking of the flag in any position.
2.Stainless steel automatic flagpole can be operated by remote control and manual.A removable control hand crank is provided in case of when there is no electricity power supply to the system.
3. lifting speed can be adjusted according to the time of the national anthem
4. The automatic flag pole can be connected to the special sound system into stainless steel electric music flagpole
The pole shaft is made from austenitic stainless steel 304 steel plate of one-piece construction with a minimum tensile strength of 520-720Mpa.
Stainless steel aircraft cable with stainless steel snap,and placed inside the flagpole for durability.
A concealed halyard systems winch is provided inside the pole .To raise and lower the flag by use of remote control or a removable hand crank.This motor is only 48 volts, even if leakage occurs, it will not endanger people's safety.
The base plate is square with slotted holes for anchor bolts, and fabricated from ASTM A240 stainless steel .
Ground Set foundation-anchor bolts is fabricated from galvanized steel Q235B ,Bolts are provided with foundation bolts, flat washers and lock washers.Each pole is offer one piece of rib reinforcement.
The standard finished for this stainless steel automatic flag pole is polished.Additional option are available upon request.
Request A Quote